About 50 results
Open links in new tab
  1. What is the number of steel bars per ton 8-32mm? - Answers

    Sep 14, 2023 · Per the attached related link, the density (hence weight) of stainless is slightly more than the mild carbon steel. Using about 8.03/7.84 ratio of density, for the same volume of material the ...

  2. What is the value range of a Newport 410-12mm choke shotgun

    Sep 11, 2023 · It's a shotgun, not a rifle. Value for the single-barrel 'Newport' guns in .410 run about $75-$100. sales@countrygunsmith.net

  3. How big is 12mm? - Answers

    Aug 10, 2023 · 12.5 mm (1 meter/1000 mm)(100 centimeters/1 meter)(1 inch/2.54 centimeters)= 0.492 inches----------------------- ( The below is somewhat helpful, but the bold area ...

  4. How much does a sheet of asbestos cement board roofing weigh?

    May 31, 2024 · A sheet of 12mm OSB (oriented strand board) typically weighs around 52-56 pounds. However, the weight can vary depending on the specific dimensions and density of the board.

  5. How long is 10mm in inches? - Answers

    Sep 15, 2023 · What thickness is 12mm or 10mm? 12mm is thicker than 10mm. Specifically, 12mm is 2mm thicker than 10mm, which is approximately 0.47 inches compared to 0.39 inches.

  6. Why is a 410 gun a caliber not a gauge? - Answers

    Sep 11, 2023 · The nominal bore of a .410 shotgun is.410 inch. Which is why it is properly called the .410 bore instead of the .410 gauge. In Europe it is sometimes called the 12mm, which is an …

  7. What are the head bolt torque settings for Toyota 3y engine?

    Sep 11, 2023 · For the Toyota Prado 3.0 TD, the head bolt torque settings typically are 30 Nm (22 ft-lb) for the initial stage, followed by a further 90 degrees rotation for the second stage. It's essential to ...

  8. What are the different types of bicycle axles and how do they impact ...

    Feb 17, 2025 · Common bicycle axle sizes include 9mm, 12mm, 15mm, and 20mm for front axles, and 10mm, 12mm, and 15mm for rear axles. These sizes vary depending on the type of bike and its …

  9. What is Khurra in civil engineering works? - Answers

    Apr 28, 2022 · 3.The top is finished with 12mm thick cement plaster of mix 1:3 and a coat of neat cement, rounded edges and adding waterproofing compound.

  10. How do you adjust a handbrake on Mazda 626? - Answers

    Oct 20, 2022 · 2. you need both sides rear in the air for this bit. 3. remove 12mm small bolts located behind rear brake calipers. 1 either side.